Loading the interactive wheel tools…

Wheel Overlay Studio

Compare several nominal wheel positions
on one shared datum.

Visualize how different widths and offsets move the wheel edges relative to the same mounting face.
Nominal dimensions only.

Compare nominal positions

All configurations share the same mounting face. Current is the baseline.

Nominal spans overlaid on one shared datum

ConfigurationInner x (mm)Outer x (mm)Inner loss (mm)Outward (mm)

Negative inner loss = nominal clearance gain: Offset only gains 10.0 mm inward clearance.

Tyres, flange profiles, brakes, body and suspension travel are not checked. Verify fitment independently.

Take the dimensions to the conversation.

Keep the nominal specifications and limitations with the comparison.

Make the most of your overlay

Use bead-seat width

Compare nominal wheel widths,
not outside flange dimensions.

Keep the same datum

Every span uses the mounting
face at zero and one mm scale.

Verify real clearances

Check tyre, brake, body and
suspension clearance separately.

Questions, Answered.

Does a smaller offset move a same-width wheel outward?

Yes. Reducing ET by 10 mm moves both nominal edges outward by 10 mm. Inner clearance loss is −10 mm, a nominal gain; outward movement is +10 mm.

What do the nominal dimensions omit?

Tyres, flange shapes, spokes, brakes, bodywork, suspension travel, bolt patterns and hub details. Have a qualified installer check real clearances.

Why can inner clearance loss be negative?

It is a signed change. A negative value means the new inner edge moves away from suspension compared with the baseline, increasing nominal geometric clearance.