Enter both wheel sizes
Input the original and new widths and offsets.
Loading the interactive wheel tools…
Compare nominal wheel-edge positions
from widths and offsets.
New nominal inner edge moves toward suspension.
New nominal outer edge moves farther outward.
Nominal bead-seat edges only. Tyres, flange shape, brakes, body and suspension travel are not modeled.
This geometry does not certify fitment.
Input the original and new widths and offsets.
The half-width change and offset change determine inner and outer movement.
Read signed movements of both nominal edges from the same mounting face.
Inner loss: 12.7 + (−10) = +2.7 mm
Outward: 12.7 − (−10) = +22.7 mm
Yes. The new nominal inner edge moves farther toward the suspension. Negative inner loss means a nominal clearance gain.
It only means the nominal outer bead-seat edge moved outward. Tyre size, physical flange shape and vehicle bodywork are not modeled.
No. Measure actual tyre, brake, body and suspension clearances separately. Geometry alone does not certify fitment.